Wheels Manufacturing Inc. PF30a Cannondale DUB
Wheels Manufacturing Inc. PF30a Cannondale DUB
Rek. pris 2 164
1 582
582 rabatt
Finns i lager
(Bara 1)
- Leverans inom 3-5 arbetsdagar
- Fri frakt
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundserviceFör- & Nackdelar
För- & Nackdelar
- This bottom bracket is easy to install by screwing two sides together.
- This bottom bracket is made of aluminium, which makes it extra durable.
- This bottom bracket has smooth-running Enduro bearings that last a long time.
- Eventually you can replace the bearings yourself.
- This bottom bracket is heavier than a plastic bottom bracket.
Specifikation
Specifikation
Märke
|
Wheels Manufacturing Inc. |
Kompatibel med
|
Landsväg / MTB |
SRAM Dub (29mm) | |
Bredd på vevlagret
|
73 mm Asymmetrisk (Cannondale) |
Diameter på vevlagret
|
46 mm |
Ytterdiameter vevlager
|
48,5 mm/16-notch |
Gänga
|
Nej |
Cannondale från 2016 | |
Lämpligt för typ av cykel
|
Racercykel / gruscykel / cyclocross |
Beskrivning
Beskrivning
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is a durable and high quality bottom bracket for your Cannondale bike. This bottom bracket can be installed by simply turning both halves into each other. Because of this, you don't need a press in order to install this bottom bracket.
Dependent bottom bracket that lasts
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is made from aluminium where most other bottom brackets are made from plastic. This makes this Wheels Manufacturing Inc. PF30a extra strong and durable.
Smooth and self-changeable bearings.
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket uses Enduro ABEC-3 bearings. These bearings are well sealed and even get an extra sealing ring from Wheels Manufacturing!
These bearings run smoothly and have excellent durability. And should the bearings ever do wear out, you can replace them yourself.
Visa mer
Visa mindre
Dependent bottom bracket that lasts
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is made from aluminium where most other bottom brackets are made from plastic. This makes this Wheels Manufacturing Inc. PF30a extra strong and durable.
Smooth and self-changeable bearings.
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket uses Enduro ABEC-3 bearings. These bearings are well sealed and even get an extra sealing ring from Wheels Manufacturing!
These bearings run smoothly and have excellent durability. And should the bearings ever do wear out, you can replace them yourself.
Läs mer på vår blogg
Guide för rätt vevlager till rätt vevhus
Läs merRelaterade produkter
Relaterade produkter
Wheels Manufacturing Inc. PF30a Cannondale DUB | SRAM Dub PF30a | SRAM Dub PF30 | |
0 recensioner | 0 recensioner | 0 recensioner | |
Kompatibel med | Landsväg / MTB | Landsväg / MTB | Landsväg / MTB |
Vevaxelns dimensioner | SRAM Dub (29mm) | SRAM Dub (29mm) | SRAM Dub (29mm) |
Bredd på vevlagret | 73 mm Asymmetrisk (Cannondale) | 73 mm Asymmetrisk (Cannondale) / 83 mm Asymmetrisk (Cannondale) | 68 mm / 73 mm |
Diameter på vevlagret | 46 mm | 46 mm | 46 mm |
Ytterdiameter vevlager | 48,5 mm/16-notch | ||
Gänga | Nej | Nej | Nej |
1 582 | 486 | 437 | |
Denna produkt | Visa produkt | Visa produkt |